IEC61032 Test Bend Finger
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 and other standards. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
Technical parameters
| bending finger diameter | 12 mm |
| Length of bent finger | 80mm(total length of three sections) |
| baffle diameter | 50mm |
| Length of baffle | 100mm |
| reference standard | GB4706.1-2005 Article 8.1.1, IEC61032:1997 |
Can be customized with 10 soil 1N thrust.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 and other standards. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 and other standards. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 and other standards. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。